Cliff Edges
Showing all 18 results
-
CB1 Convex Cliff Corner with sandy cove
£10.00Corner cliff section with one or more sandy coves, compatible with our other cliff sections. This comprises land only, to sit on top of a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB2 Concave Cliff Corner with Beach
£10.00Concave cliff corner with sand beach, compatible with our other stand alone cliffs. Designed to sit on top of a sea tile or mat
-
CB3 Cliff to LH beach
£7.50Cliff edge falling to a beach at it’s left hand, compatible with other cliff edges, designed to sit on a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB4 RH Cliff with Beach end
£7.50Cliff falling to a beach on its RHS, compatible with our other stand alone cliff sections, designed to sit on a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB5 Large cove
£15.00Matched LH and RH cliff to beach ends, backing on to a hill, Match with all other cliff and beach ends
Cliff Edges, Cliff Edges - Green, Coastline, Coastline - Beach and Cliff
-
CBC1 Cliff/Beach Corner (Pair)
£7.50Cliff corner with beach end (pair supplied)
Cliff Edges, Cliff Edges - Green, Coastline, Coastline - Beach and Cliff
-
CBP1 Cliff and Beach Pack
£30.00Stand alone pack to sit on a sea mat or board, it consists of one 12″ corner section, two 12″ straight sections and two end pieces. Fully compatible with our other cliff and beach sections, total height 40mm, compatible with our terrain tiles
Cliff Edges, Cliff Edges - Green, Coast, sea & estuaries, Coastline, Coastline - Beach and Cliff, Tile and Starter Sets
-
CE01 Cliff Edge – Straight – concave
£5.00A stright 12″ long cliff edge. Finished in Grey rock, with verdant green top
-
CE02 Cliff edge – convex.
£5.00A 122 Cliff edge, 40mm high to fit our standard terrain boards.
-
CE03 Cliff corner – Concave
£7.50A cliff corner (Inner). 40mm high to fit our stndard tile height and 1′ ‘square’
-
CE04 Cliff corner – convex
£7.50A cliff corner, stands 40mm high to fit our standard boards and is 1′ ‘square’
-
CE05 Cliff End
£5.00A cliff end, or peninsula. Is between 4 and 6″ long and stands 40mm high. Can be used as a stand-alone piece, or will fit on the end of any two cliff edge.
-
CE06 Cliff Ends – pair
£7.50A pair of cliff ends, to finish off a cliff section, or do an outer radius 90 degree turn. They stand 40mm high.
-
CE07 Cliff to Hill edge – LH
£5.00This section, with cliff to left, allows you to convert our hill edges to cliff edges. The right-hand side mates to our Hill Edges, the left to our Cliff Edges.
-
CE08 Cliff to Hill Edge RH
£5.00This section, with cliff to right, allows you to convert our hill edges to cliff edges. The left-hand side mates to our Hill Edges, the right to our Cliff Edges.
-
CEP1 Cliff Edge Pack
£24.00 -
CEP2 – Cliff Edge Pack with Beach
£26.00As CEP1, with beach in the corner section
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff, Tile and Starter Sets, Uncategorised
-
DS-01 Design Your Own
Blue Tiles, Cliff Edges, Coast, sea & estuaries, Coastline - Beach and Cliff, Coastlines, Contours & Corners, Fords, Fords and crossings, Fords and crossings, FoW Coastal Tiles, Grass Tiles, Green hills, Green Tiles, Green Tiles, Gullies Moors and Heath, Hill Edges, Hill Edges - Sand, Hill Tiles, Hills - stand alone, Marshes and Lakes, Modular tile system 2' square, Modular tile system small tiles, Plain Tiles, Plain Tiles, River Crossings, Rivers, Rivers, Rivers & Streams, Rivers and Streams, Rivers and Streams, Roads, Roads, Roads - Dirt, Roads - Tarmac, Roads and Tracks, Sand, Sand Feature Tiles, Sand Gullies, Sand hills, Sand Tiles, Streams, Streams, Tile and Starter Sets, Tracks, Tracks, Tracks, Trench Tiles, Uncategorised, Wide and Extra wide rivers, Wide River