Showing all 9 results
CEP1 Cliff Edge Pack£22.50
CS02 6×4 Coastal Pack£75.00
CS03 Coast and Island Pack£35.00
DS-01 Design Your Own
Uncategorised, Blue Tiles, Cliff Edges, Coast, sea & estuaries, Coastline - Beach and Cliff, Coastlines, Contours & Corners, Fords, Fords and crossings, Fords and crossings, FoW Coastal Tiles, Grass Tiles, Green hills, Green Tiles, Green Tiles, Gullies Moors and Heath, Hill Edges, Hill Edges - Sand, Hill Tiles, Hills - stand alone, Marshes and Lakes, Modular tile system 2' square, Modular tile system small tiles, Plain Tiles, Plain Tiles, River Crossings, Rivers, Rivers, Rivers & Streams, Rivers and Streams, Rivers and Streams, Roads, Roads, Roads - Dirt, Roads - Tarmac, Roads and Tracks, Sand, Sand Feature Tiles, Sand Gullies, Sand hills, Sand Tiles, Streams, Streams, Tile and Starter Sets, Tracks, Tracks, Tracks, Trench Tiles, Wide and Extra wide rivers, Wide River
TSS01 – 6×4 Basic Starter£90.00
This set gives you everything you need to get started, with six 2′ square tiles, for a 6×4 table, including one rough ground tile, three track tiles (straight, T junction, and 90 degree bend), one field tile. and one plain tile, all with the undulating finish, along with 20mm medium and large hill packs, and a large 20mm cliff edge hill. The latge hills are big enough to cover the rough ground patches, adding to your flexibility
TSS02 Extension set£30.00
The ‘extension’ set. This brings the basic set from 4′ x 4′ to 6′ x 4′ (1800 x 1220 in foreign!) Still all in plain green. It gives the flexibility to the basic set, to start thinking about adding roads and rivers at a later date.
The set would retail at £35
TSS03 Hill Edge Starter Set£35.00
Start to raise your battlefield to the next dimension! This set contains the following tiles to lift your game.1 x HE1 12″ hill straight,1 each HE5 and HE6 corner, 1 x HE7 Hill end, 1 x HE8 Hill corners (pair) and 1 x HE9
TSS04 Trench starter set£50.00
This set comprises 4 No 2′ x 2′ boards. All are finished in a sand effect, with green and brown flock drifted through. Shell holes are cut into the boards and flocked brown, with some having a water effect inside.
The trenches are usually cut to be 1″ wide and 10mm deep, but it is possible to change this to suit your requirements – provided only one trench line is required, there is no extra charge.