Coastline - Beach and Cliff
Showing all 26 results
-
CB1 Convex Cliff Corner with sandy cove
£10.00Corner cliff section with one or more sandy coves, compatible with our other cliff sections. This comprises land only, to sit on top of a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB3 Cliff to LH beach
£7.50Cliff edge falling to a beach at it’s left hand, compatible with other cliff edges, designed to sit on a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB4 RH Cliff with Beach end
£7.50Cliff falling to a beach on its RHS, compatible with our other stand alone cliff sections, designed to sit on a sea tile or mat
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff
-
CB5 Large cove
£15.00Matched LH and RH cliff to beach ends, backing on to a hill, Match with all other cliff and beach ends
Cliff Edges, Cliff Edges - Green, Coastline, Coastline - Beach and Cliff
-
CBC1 Cliff/Beach Corner (Pair)
£7.50Cliff corner with beach end (pair supplied)
Cliff Edges, Cliff Edges - Green, Coastline, Coastline - Beach and Cliff
-
CBP1 Cliff and Beach Pack
£30.00Stand alone pack to sit on a sea mat or board, it consists of one 12″ corner section, two 12″ straight sections and two end pieces. Fully compatible with our other cliff and beach sections, total height 40mm, compatible with our terrain tiles
Cliff Edges, Cliff Edges - Green, Coast, sea & estuaries, Coastline, Coastline - Beach and Cliff, Tile and Starter Sets
-
CEP2 – Cliff Edge Pack with Beach
£26.00As CEP1, with beach in the corner section
Cliff Edges, Cliff Edges - Green, Coastline - Beach and Cliff, Tile and Starter Sets, Uncategorised
-
CL1 Straight beach
£7.50A 1′ x 1′ Beach tile, 1/3rd of the tile is green and is 40mm high. 1/3d each are sand and blue and are 30mm high, which matches our sea boards
-
CS01 Rocky Island or Outcrop Pack
£20.00Coastline, Coastline - Beach and Cliff, Coastlines, Green hills
-
DS-01 Design Your Own
Blue Tiles, Cliff Edges, Coast, sea & estuaries, Coastline - Beach and Cliff, Coastlines, Contours & Corners, Fords, Fords and crossings, Fords and crossings, FoW Coastal Tiles, Grass Tiles, Green hills, Green Tiles, Green Tiles, Gullies Moors and Heath, Hill Edges, Hill Edges - Sand, Hill Tiles, Hills - stand alone, Marshes and Lakes, Modular tile system 2' square, Modular tile system small tiles, Plain Tiles, Plain Tiles, River Crossings, Rivers, Rivers, Rivers & Streams, Rivers and Streams, Rivers and Streams, Roads, Roads, Roads - Dirt, Roads - Tarmac, Roads and Tracks, Sand, Sand Feature Tiles, Sand Gullies, Sand hills, Sand Tiles, Streams, Streams, Tile and Starter Sets, Tracks, Tracks, Tracks, Trench Tiles, Uncategorised, Wide and Extra wide rivers, Wide River
-
CL1A Straight Beach double length 2’x1′
£12.50A 2′ x 1′ straight beach. The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL2 Beach Corner (1/4 Sea)
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL3 Beach Corner (3/4 Sea)
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL4 Beach Cove
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL5 Corner Cove
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL6 Stream estuary
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL7 River estuary
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL8 Stream estuary (straight coast)
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL9 River estuary (straight coast)
£7.50The rear 1/3rd (green) is 40mm high and matches the height of all our land tiles. The 1/3rd beach and blue sections are 30mm high and match the height of our sea boards
-
CL10 Straight Cliff
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our satndard tile height
-
CL11 Straight Cliff 2’x1′
£12.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our satndard tile height
-
CL12 Concave cliff corner
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our standard tile height
-
CL13 Convex cliff corner
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our standard tile height
-
CL14 Cliff outer corner
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our standard tile height
-
CL15 Cliff to Beach RH
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our standard tile height
-
CL16 Cliff to Beach LH
£7.50The cliff face rises 10mm from the surface of a standard (30mm high) 1′ x 1′ sea tile, providing a rear edge that is 40mm in height, which matches our standard tile height